 Plastic Valves
Plastic Solenoid Valves.Plastic solenoid valves are manufactured from Nylon, Delrin (POM), PTFE, PVDF, PVC and PP to suit each and every application from agricultural irrigation systems to highly aggressive and corrosive acid or alkali media. All plastic solenoid valves offer a reduced price solution for the controlled flow of liquids and gases compared to stainless steel solenoid valves, but as plastic is generally a relatively weak but lightweight material most plastic solenoid valves will have pressure and temperature limitations, generally from 2 up to about 10 bar and 100°C maximum.
You can read more about plastic solenoid valves here.
Plastic electric solenoid actuated valves fall into three main groups.Low priced Nylon general purpose water valves for appliances and agriculture.
Middle of the range valves such as Delrin solenoid valves for slightly aggressive media such as slight acid or alkali, pure water, Reverse Osmosis water, de-mineralised water.
High end solenoid valves such as PTFE, PVC, PP and PVDF solenoid valves with isolating core (dry armature design) for very aggressive and corrosive acid and alkali media applications. Most plastic electrically actuated valves are available across a range of operating voltages from 12vAC, 24vAC, 48vAC, 110vAC and 230vAC or 12vDC, 24vDC, 48vDC and even 110vDC with either IPXO faston tag, IP54 flying lead wire or IP65 DIN43650 safe area solenoid coils. Some better plastic valve manufacturers will offer ATEX hazardous area coils to suit.
2/2 Plastic Solenoid Valves for slightly aggressive media De-mineralised, Reverse Osmosis and Pure Water, Slight Acid or Alkali | 
| Plastic solenoid valves Delrin Series: PA Function: 2/2 normally closed Operation: servo pressure assisted diaphragm Pressure: 0.5 to 10 Bar Port: 3/8 to 11/2" BSP or NPT thread Body: delrin (POM) Seal: EPDM, FKM or NBR Media: air,water,de-mineralised water,pure water,RO water,slight acid,slight alkali. | 
| Plastic solenoid valves Delrin Series: NOPA Function: 2/2 normally open Operation: servo pressure assisted diaphragm Pressure: 0.5 to 10 Bar Port: 3/8,1/2,3/4,1,11/4,11/2" BSP or NPT thread Body: delrin (POM) Seal: EPDM, FKM or NBR Media: air,water,demin water,pure water,RO water, slight acid or alkali. | 
| Plastic solenoid valves Delrin Series: PK Function: 2/2 normally closed Operation: assisted lift diaphragm Pressure: 0 to 7 Bar Port: 1/2,3/4,1" BSP or NPT thread Body: nylon Seal: EPDM, FKM or NBR Media: air,water,demin water,pure water,RO water, slight acid or alkali. | 
| Plastic solenoid valve series: NOPK Function: 2/2 normally open Operation: assisted lift diaphragm Pressure: 0 to 7 Bar Port: 1/2 to 1" BSP or NPT thread
Body: nylon Seal: EPDM, FKM or NBR Media: air,water,demin water,pure water,RO water, slight acid or alkali. | 2/2 Plastic Solenoid Valves for Drinking Water, water appliances and WRAS approved Nylon solenoid valves. | 
| Nylon solenoid valve single 180 degree RPE :S180 Function: 2/2 normally closed Operation: servo pressure assisted Pressure: 0.2 to 10 Bar Port: 3/4 BSP male to 10mm or 12mm hose Body: nylon Seal: NBR Media: water | 
| Nylon solenoid valve single 90 degree RPE :S90 Function: 2/2 normally closed Operation: servo pressure assisted Pressure: 0.2 to 10 Bar Port: 3/4 BSP male to 10mm or 12mm hose Body: nylon Seal: NBR Media: water | 
| Nylon solenoid valve double 180 degree RPE :D180 Function: 2/2 normally closed Operation: servo pressure assisted Pressure: 0.2 to 10 Bar Port: 3/4 BSP male to double 10mm or 12mm hose Body: nylon Seal: NBR Media: water | 
| Nylon solenoid valve double 90 degree RPE :D90 Function: 2/2 normally closed Operation: servo pressure assisted Pressure: 0.2 to 10 Bar Port: 3/4 BSP male to double 10mm or 12mm hose Body: nylon Seal: NBR Media: water | 
| Nylon solenoid valve triple 180 degree RPE :T180 Function: 2/2 normally closed Operation: servo pressure assisted Pressure: 0.2 to 10 Bar Port: 3/4 BSP male to triple 10mm or 12mm hose Body: nylon Seal: NBR Media: water | 
| Nylon solenoid valve triple 90 degree RPE :T90 Function: 2/2 normally closed Operation: servo pressure assisted Pressure: 0.2 to 10 Bar Port: 3/4 BSP male to triple 10mm or 12mm hose Body: nylon Seal: NBR Media: water | 
| normally closed water solenoid valves RPE 115BC: Function: 2/2 normally closed Operation: servo pressure assisted Pressure: 0.2 to 10 Bar Port: 1/4,3/8,1/2,3/4 BSP or 15mm JG Push Fit end Body: nylon Seal: NBR Media: water | 
| 115BA RPE appliance water solenoid valve Function: 2/2 normally open Operation: servo pressure assisted Pressure: 0.2 to 10 Bar Port: 1/4 to 3/4 BSP or 15mm JG Push Fit end Body: nylon Seal: NBR Media: water | 
| Terza WRAS approved water solenoid valve Function: 2/2 normally closed Operation: servo pressure assisted Pressure: 0.2 to 10 Bar Port: 1/2,3/4,1,11/4,11/2,2 BSP or NPT thread
Body: nylon Seal: NBR or EPDM
Media: water
complete with manual over ride and flow controller | 
| Nylon miniature solenoid valve: GC Function: 2/2 normally closed Operation: direct acting Pressure: 0 to 8 Bar Port: 1/4 BSP Body: nylon Seal: EPDM Media: water, air | 
| Nass Magnet System 8 Solenoid Valves: GKR Function: 2/2 normally closed Operation: direct acting Pressure: 0 to 14 Bar Port: 00 22mm sub base Body: nylon Seal: NBR,EPDM,FKM Media: water,air | 
| Plastic air solenoid valve: H Function: 3/2 normally closed Operation: direct acting Pressure: 0 to 35 Bar Port: CNOMO 22mm sub base Body: nylon Seal: NBR,EPDM,FKM Media: water,air | 
| Sub base mount solenoid valve: 3-10 Function: 3/2 normally closed Operation: direct acting Pressure: 0 to 8 Bar Port: 9.8mm sub base Body: PA6 Seal: NBR,EPDM,FKM Media: filtered air, inert gases | 2/2 Plastic Solenoid Valves for Very Aggressive Media Strong Acid, Alkali, Solvent etc | 
| PTFE solenoid valve for acids: PE220 Function: 2/2 normally closed Operation: assisted lift Pressure: 0 to 5 Bar Port: 1/4,3/8,1/2,3/4 or 1" BSP or NPT thread Body: PTFE Seal: PTFE Media: very aggressive corrosive acid and alkali | 
| PTFE solenoid valve for corrosive acids: PH Function: 2/2 normally closed Operation: assisted lift Pressure: 0 to 10 Bar Port: 1/4,3/8,1/2,3/4" BSP or NPT thread Body: PTFE Seal: PTFE Media: very aggressive corrosive acid and alkali | 
| Isolated diaphragm solenoid valve: C40 Function: 2/2 normally closed Operation: direct acting Pressure: 0 to 0.5 Bar Port: 1/2" BSP or NPT thread Body: PVC Seal: FKM, EPDM, Silicone Media: very aggressive corrosive acid and alkali | 
| Dry armature solenoid valve: PPA1 Function: 2/2 normally closed Operation: direct acting Pressure: 0 to 2 Bar Port: 1/4" BSP or NPT thread Body: PPA Seal: FKM, EPDM, Silicone Media: very aggressive corrosive acid and alkali | 
| Dry armature solenoid valve: PPA2 Function: 2/2 normally open Operation: direct acting Pressure: 0 to 1 Bar Port: 1/4" BSP or NPT thread Body: PPA Seal: FKM, EPDM, Silicone Media: very aggressive corrosive acid and alkali
|  | PVC solenoid valve for acid: UDC Function: 2/2 normally closed Operation: direct acting Pressure: 0 to 1 Bar Port: 1/4 to 1/2" BSP or NPT thread
Body: PVC Seal: PTFE Media: very aggressive corrosive acid and alkali | 
| Plastic solenoid valve: 111 Function: 2/2 normally closed Operation: direct acting Pressure: 0 to 6 Bar Port: cement socket or 1/4" BSP or NPT thread Body: PVC, PVDF,PTFE Seal: EPDM, FKM Media: very aggressive corrosive acid and alkali | 
| 148 plastic solenoid valve Function: 2/2 normally closed Operation: direct acting Pressure: 0 to 6 Bar Port: cement socket or 1/4 to 1/2" BSP or NPT Body: PVC or PTFE Seal: FKM or EPDM Media: very aggressive corrosive acid and alkali | 
| 150 plastic solenoid valve Function: 2/2 normally closed Operation: direct acting Pressure: 0 to 2 Bar Port: cement socket or 1/4 to 1/2" BSP or NPT Body: PVC, PP or PTFE Seal: FKM, EPDM Media: very aggressive corrosive acid and alkali |
| Plastic solenoid valve: NO150 Function: 2/2 normally open Operation: direct acting Pressure: 0 to 2 Bar Port: cement socket or 1/4 to 1/2" BSP or NPT Body: PVC, PP or PTFE Seal: FKM, EPDM Media: very aggressive corrosive acid and alkali | 
| Plastic solenoid valve: 160A Function: 2/2 normally closed Operation: servo pressure assisted Pressure: 0.3 to 6 Bar Port: 1/2 to 2" BSP or NPT thread Body: PVC, PP or PTFE Seal: FKM, EPDM Media: very aggressive corrosive acid and alkali |
| Plastic solenoid valve: NO160A Function: 2/2 normally open Operation: servo pressure assisted Pressure: 0.3 to 6 Bar Port: 1/2 to 2" BSP or NPT thread Body: PVC, PP or PTFE Seal: FKM, EPDM Media: very aggressive corrosive acid and alkali | 
| Plastic angle seat piston solenoid valve: 136 Function: 2/2 normally closed Operation: direct acting Pressure: 0 to 6 Bar Port: 1/2 to 2" BSP or NPT thread Body: PVC Seal: FKM, EPDM Media: very aggressive corrosive acid and alkali |
|  | |
